You can build a duplex on many Brisbane blocks, but it depends mostly on your zone. If you're in the Low-medium density residential zone, it's now easier than ever. Since 18 September 2026, a duplex on a 400m² block outside a "key location" may not need a development application at all. If you're in the Low density residential zone, which covers most of suburban Brisbane, a duplex is much harder to get approved.
Brisbane City Plan calls a duplex a dual occupancy. That means two homes on one lot, attached or detached, or two homes on separate lots that share common property. Below we go through what your zone allows, the lot size you need, and when you'll need Council approval.
Want to know about your block? Send us the address and we'll tell you what your zone allows, free. Send us your address
Step 1: Find out your zone
Your zone decides almost everything about a duplex. You can look it up on Brisbane City Council's City Plan online mapping by searching your address. Note the zone, any zone precinct, any neighbourhood plan and any overlays that apply (flood, character, bushfire and so on). If the maps are confusing, send us the address and we'll check it for you.
Duplex rules in Brisbane by zone
This is the short version for the most common residential zones under Brisbane City Plan 2014, as amended on 18 September 2026.
-
Low-medium density residential, outside a key location: yes, on a lot of 400m² or more. No DA if it meets every acceptable outcome in the Dual occupancy code, otherwise a code assessable DA. Height up to 2 storeys and 9.5m (2 storey mix precinct) or 3 storeys and 11.5m (3 or 4 storey mix precinct).
-
Low-medium density residential, in a key location: yes, on a lot of 600m² or more. Code assessable DA. Height depends on the precinct, up to 3 storeys and 11.5m.
-
Medium density residential: yes. Code assessable DA. Up to 5 storeys, or the height in a neighbourhood plan.
-
Character residential (Infill housing precinct): yes, if any house built in 1946 or earlier is kept. Code assessable DA. Up to 2 storeys and 9.5m.
-
Low density residential: rarely. Impact assessable DA, with public notification. Usually 2 storeys.
What changed in September 2026
Council adopted its More Homes, Sooner amendment for the Low-medium density residential zone on 18 August 2026, and it took effect on 18 September 2026. For duplexes, three changes matter most:
-
Smaller minimum lot. A duplex is now supported on a 400m² lot outside a key location, where the design criteria are met. Inside a key location the minimum is 600m², to stop land being broken up near transport and centres.
-
No DA in many cases. Where the whole frontage is outside a key location and the design meets every acceptable outcome in the Dual occupancy code, a duplex is now accepted development. You go straight to a building certifier.
-
New precinct. The old "2 or 3 storey mix" and "Up to 3 storeys" precincts were merged into a new "3 or 4 storey mix" precinct, where a duplex can go to 3 storeys and 11.5m.
A key location is land close to centres and to public transport stops or stations with frequent services (every 20 minutes or better on weekdays and 30 minutes or better on weekends). Council wants apartments there, so the duplex rules are stricter.
"No DA" doesn't mean "no rules"
Accepted development only applies if your design meets every acceptable outcome in the code. That includes setbacks, car parking, landscaping, and a building footprint of no more than 50% of the site in most areas. Miss one and you need a code assessable DA, assessed only against the parts you don't meet.
Overlays and neighbourhood plans can also change the answer. A flood overlay, a character overlay or a neighbourhood plan can add requirements or trigger an application on its own. You'll still need building approval from a certifier either way.
Can I build a duplex in the Low density residential zone?
Usually not. Most of suburban Brisbane is in the Low density residential zone, and the zone is meant for houses on larger lots. A duplex there isn't on Council's list of code assessable uses, so it needs an impact assessable DA. That means public notification, neighbours can make submissions, and submitters can appeal an approval. Approval is hard to get.
If you're in this zone, there are often better options:
-
A granny flat (secondary dwelling) with your house, which is often much simpler.
-
Subdividing, if your lot is big enough. Since September 2026 the 300m² lot option applies to a wider area near shopping centres.
-
Keeping the existing house and subdividing the back. See our guide: Can I Subdivide My Block and Keep the Existing House?
Duplex or subdivision?
A duplex sits on one lot. You can later give each home its own title through a community title scheme, but that's a separate process with its own costs. If your goal is two homes you can sell separately, compare a duplex with subdividing into two lots before you start designing. The best choice depends on your zone, your lot size and what you plan to do with the homes.
How long does it take?
-
Accepted development: no Council application, so you go straight to design and building approval.
-
Code assessable DA: Council must assess it against the codes only, with no public notification. The standard decision period is 35 business days, but information requests often add time. See how long a DA takes in Brisbane.
-
Impact assessable DA: longer, because of public notification and possible submissions and appeals.
On top of design and approval costs, budget for infrastructure charges for the extra dwelling and new water and sewer connections. See what a DA costs in Brisbane.
How we help
We check what your block supports before you spend money on design. We confirm your zone, precinct, key location status, overlays and neighbourhood plan. Then we tell you whether a duplex can go ahead without a DA, needs a code assessable application, or isn't worth chasing. If you need a DA, we prepare and lodge it for a fixed quote and manage it through to approval. Find out more about our town planning services.
Duplex FAQs
What is the minimum lot size for a duplex in Brisbane?
In the Low-medium density residential zone, it's 400m² outside a key location and 600m² inside one, where the design criteria are met. Other zones and neighbourhood plans can set different requirements.
Do I need council approval to build a duplex in Brisbane?
Not always. Since 18 September 2026, a duplex in the Low-medium density residential zone can be accepted development if it's outside a key location and meets every acceptable outcome in the Dual occupancy code. You'll still need building approval from a certifier.
Can I build a duplex in the Low density residential zone?
It's possible but rarely approved. It needs an impact assessable DA with public notification. A granny flat or a subdivision is often the better option.
How high can a duplex be in Brisbane?
In the Low-medium density residential zone, up to 3 storeys and 11.5m in the 3 or 4 storey mix precinct, or 2 storeys and 9.5m in the 2 storey mix precinct. Neighbourhood plans can set lower limits.
Can I sell each half of a duplex separately?
Yes, if each home gets its own title. That's usually done through a community title scheme after the duplex is approved, which is a separate process. If selling separately is the plan, compare it with a two-lot subdivision first.
What is a key location?
Land near centres and near public transport stops or stations with frequent services. Council's mapping shows which sites are in one. We can check yours.
Find out what your block supports
The rules have just changed, so a block that couldn't take a duplex last year might now. Send us your address and we'll tell you what your zone allows, whether you need a DA, and the best way to get two homes on your land. Send us your address